In brief

  • From 17 November 2026, cold-rolled steel sheet and coils from India, Japan, Taiwan, Türkiye and Vietnam pay a definitive anti-dumping duty on entry into the European Union. The rate depends on the country and the producer: 3.0% for Tatmetal (Türkiye), 7.8% for Borçelik (Türkiye), 9.5% for India, 16.0% for Vietnam, 20.7% for China Steel and Chung Hung (Taiwan), 27.0% for all other imports from Taiwan and 27.9% for Japan. The duty comes on top of the normal customs duty.
  • Who is affected. Importers and steel service centres in Romania that bring in cold-rolled sheet from the five countries, and then the factories that process it: car parts, household appliances, metal furniture, shelving and storage systems, tubes and pipes, steel structures. The only Romanian company named in the regulation is Bamesa Oțel of Topoloveni, as a related importer of the Turkish producer Borçelik.
  • No duty on past imports. Imports registered since December 2025 are not taxed retroactively, because the Commission did not impose provisional duties. A producer’s individual rate applies only if the commercial invoice carries the declaration required by Article 1(3); without it, the highest rate set for the country of origin is paid.
Act: Commission Implementing Regulation (EU) 2026/2547 of 13 November 2026 imposing a definitive anti-dumping duty on imports of certain cold-rolled flat steel products originating in India, Japan, Taiwan, Türkiye and Vietnam
Published: Official Journal of the European Union, L series, 2026/2547 of 16 November 2026
In force from: 17 November 2026, the day after publication, under Article 3

Exactly 139 days after steel imports into the European Union moved to a permanent cap of 18.3 million tonnes a year, with a 50% duty above it, the European Commission is adding a measure aimed at a single product: cold-rolled steel sheet from India, Japan, Taiwan, Türkiye and Vietnam. Commission Implementing Regulation (EU) 2026/2547, published in the Official Journal of the European Union on 16 November 2026, imposes from 17 November 2026 a definitive anti-dumping duty of between 3.0% and 27.9% of the price of the goods at the Union frontier.

The product concerned is uncoated cold-rolled flat steel, sold in coils or sheets: the raw material from which car bodies, washing-machine casings, metal shelving, cabinet doors and construction profiles are stamped. The regulation expressly excludes stainless steel, electrical steel, very thin annealed sheet under 0.35 mm known as “black plates”, and the silicon steel used in transformers. For customs purposes, the product falls under CN codes in headings 7209 and 7211, plus 7225 50 80 and 7226 92 00.

The investigation opened on 18 September 2025, following a complaint by the European steel producers’ association, EUROFER. The Commission found that producers in the five countries were selling in the Union below normal value, and that their imports rose by 28% between 2022 and the investigation period (1 July 2024 to 30 June 2025), to 1,687,020 tonnes, or 23% of consumption on the Union’s free market. Over the same period, the average price of these imports fell by 34%.

The duty is set per producer. The rates laid down in Article 1(2) are:

  • India: 9.5% for JSW Steel Limited and JSW Steel Coated Products Limited, for Tata Steel Limited (listed in the Annex) and for all other imports.
  • Japan: 27.9% for Nippon Steel Corporation, Daido Steel, JFE Steel, Proterial and for all other imports.
  • Taiwan: 20.7% for China Steel Corporation, Chung Hung Steel Corporation and Synn Industrial (listed in the Annex); 27.0% for all other imports.
  • Türkiye: 3.0% for Tatmetal; 7.8% for Borçelik; 4.9% for the cooperating producers listed in the Annex (the Erdemir group and three other producers); 7.8% for all other imports.
  • Vietnam: 16.0% for POSCO Vietnam, for the two producers listed in the Annex and for all other imports.

Under the text, the percentages apply to the “net, free-at-Union-frontier price, before duty”. As a worked example, a batch of Japanese sheet worth EUR 100,000 at the frontier pays EUR 27,900 in anti-dumping duty, on top of customs duty; the same batch made by Tatmetal in Türkiye pays EUR 3,000.

What it changes in practice

For importers in Romania. Every declaration for release for free circulation lodged from 17 November 2026 for cold-rolled sheet from the five countries carries the anti-dumping duty. Customs calculate it on the basis of the producer’s TARIC additional code: 88GB for JSW, 88GD for Nippon Steel and Daido, 88GG for China Steel and Chung Hung, 88GI for Borçelik, 88GJ for Tatmetal, 88GO for POSCO Vietnam, while the producers in the Annex have their own codes from the same series, 88GC to 88GQ. For any other producer, code 8999 and the rate for “all other imports” apply.

The invoice sets the rate. Article 1(3) makes the individual rate conditional on a valid commercial invoice on which an official of the issuing entity, identified by name and function, certifies the tonnage, the producer, the TARIC code and the country. The wording of the declaration is fixed in the regulation and begins: “I, the undersigned, certify that the (volume in tonnes) of cold rolled flat steel sold for export to the European Union”. Without this declaration, the rate for all other imports from the country concerned applies. The difference matters for Taiwan (27.0% instead of 20.7%), for Tatmetal (7.8% instead of 3.0%) and for the Turkish producers in the Annex (7.8% instead of 4.9%).

For steel service centres and factories. Cold-rolled sheet goes into the production of car parts, household appliances, metal furniture, storage systems, tubes and machinery. In recital 1031, the Commission took the view that the product accounts for “only a limited share of the overall production costs” of these industries, but it had no data from any user, because none of them answered the questionnaire. For a processor that bought Japanese or Taiwanese sheet, the cost of imported sheet rises by up to 27.9% of its frontier price unless it switches supplier.

For Bamesa Oțel. The processing centre in Topoloveni appears on the list of companies verified in the investigation as a related importer of the Turkish producer Borçelik, which sells through it to unrelated customers in the Union. The regulation imposes no separate obligation on it; sheet from Borçelik, however, falls under the 7.8% duty.

For steel producers. According to recital 1020, the Union industry protected by the measure is located in 13 Member States: Austria, Belgium, Czechia, Germany, Hungary, Italy, Luxembourg, the Netherlands, Portugal, Slovakia, Slovenia, Spain and Sweden. It has 8,598 direct employees working on this product and ran at 72% of capacity during the investigation period. Romania is not on this list.

For new exporters. Article 2 allows producers in Taiwan and Türkiye that did not export during the investigation period to apply for the rate set for non-sampled cooperating companies, if they show that they are not related to an exporter subject to the measures and that they have started exporting or have an irrevocable contractual obligation for a significant quantity.

What has changed compared with the previous situation

Until 16 November 2026, cold-rolled sheet from these five countries paid no anti-dumping duty. It was subject only to the general steel measure, with country quotas and a 50% duty above the quota, applicable from 1 July 2026, and to normal customs duty. Since December 2025, imports had only been registered by customs, under Commission Implementing Regulation (EU) 2025/2432, so that any future duty could be collected retroactively.

There will be no retroactive collection. On 17 April 2026 the Commission announced that it would not impose provisional duties, and in recitals 1065-1070 it rejected EUROFER’s request to levy the definitive duty on registered imports. The reasoning: Article 10(4) of Regulation (EU) 2016/1036 limits retroactive collection to products entered for consumption no more than 90 days before the application of provisional duties, so without provisional duties there is no starting point for the calculation.

Cold-rolled sheet from China and Russia was already subject to anti-dumping duty under Implementing Regulation (EU) 2022/2068. With this regulation, seven countries of origin now pay anti-dumping duty on the same product.

Advantages and disadvantages

What it improves

  • Producers that cooperated in the investigation get their own rates, sometimes well below the residual rate: Tatmetal pays 3.0%, while other imports from Türkiye pay 7.8%.
  • Imports made during the registration period, from December 2025 to 16 November 2026, do not pay the duty, so stock brought in before 17 November 2026 carries no new costs.
  • The regulation sets the exact wording of the invoice declaration and the TARIC codes, so importers know in advance which document customs will ask for.
  • The Commission finds that the Union industry has spare capacity of about 12 million tonnes, so supply from European production remains possible.

What remains a problem

  • The duty comes on top of the quotas and the 50% above-quota duty applicable since 1 July 2026, so sheet from these countries can be hit by two cumulative measures.
  • Romanian processors carried no weight in the Union interest assessment: no unrelated importer and no user answered the Commission’s questionnaire.
  • No Romanian plant is among the protected European producers, so in Romania the measure is felt mainly as a cost.
  • The Romanian version of Article 1(1) misdescribes one of the exclusions, the one for high-speed steel; the English version gets it right.

Practical advice

  1. For each ongoing contract, check the actual producer of the sheet as well as the country of shipment. The duty rate is tied to the producer, and entities related to a named producer do not automatically take its rate, according to recital 1058.
  2. Ask your supplier to include on every invoice the declaration from Article 1(3), with the exact wording from the regulation, dated and signed, with the signatory’s name and function and the TARIC additional code. An invoice without the declaration automatically sends the batch to the highest rate.
  3. For batches already in port, the date that counts is the date of the declaration for release for free circulation. A batch declared from 17 November 2026 pays the duty even if it was ordered or loaded earlier.
  4. Recalculate your supply prices with the duty included and compare them with offers from Union production or from other countries of origin. The gap between 3.0% and 27.9% reshuffles the supplier ranking.
  5. If you resell products made from imported sheet, check the price adjustment clauses in your customer contracts. The anti-dumping duty is a new cost and can be recovered only where such a clause exists.
  6. Keep the import file complete: transport documents, certificates of origin, invoices. Recital 1061 says customs may request additional documents even when the invoice is compliant.

Frequently asked questions

From when is the anti-dumping duty payable on cold-rolled sheet from these countries?
From 17 November 2026, the day after the regulation was published in the Official Journal of the European Union, under Article 3. It applies to declarations for release for free circulation lodged from that date.
Is the duty also payable on imports made before 17 November 2026?
No. Although imports were registered from December 2025, the Commission decided in recitals 1065-1070 that the conditions for retroactive collection are not met, because there were no provisional duties.
How much do imports from each country pay?
India 9.5%; Japan 27.9%; Taiwan 20.7% for cooperating producers and 27.0% for the others; Türkiye 3.0% for Tatmetal, 7.8% for Borçelik, 4.9% for the cooperating producers in the Annex and 7.8% for the others; Vietnam 16.0%. The percentage applies to the net price at the Union frontier, before duty.
What happens if the invoice lacks the declaration required by the regulation?
The rate for “all other imports” from the country of origin applies until a compliant invoice is presented. For India, Japan and Vietnam the rate is the same; for Taiwan and Türkiye the difference ranges from 2.9 to 6.3 percentage points.
Are galvanised sheet or stainless steel also covered?
No. The regulation covers cold-rolled sheet that is neither clad nor coated. Stainless steel, electrical steel, “black plates” under 0.35 mm and silicon steel are expressly excluded in Article 1(1).
Is any Romanian company being penalised?
No. The regulation applies to producers in the five countries. Bamesa Oțel of Topoloveni appears only as a related importer of the Turkish producer Borçelik, verified in the investigation; the sheet it imports from Borçelik pays 7.8%.

Errors and inconsistencies in the published text

  • Article 1(1), fourth indent, and recital 122. In the Romanian version of the regulation, the fourth indent excludes from the duty “produselor laminate plate din oțeluri inoxidabile, simplu laminate la rece, din oțeluri rapide” (flat-rolled products of stainless steel, not further worked than cold-rolled, of high-speed steel). The same sentence of paragraph 1, however, already removes stainless steel from the product definition at the outset (“cu excepția oțelurilor inoxidabile”, excluding stainless steel), so in Romanian the exclusion takes nothing further out of the scope. The English version of the same provision is consistent: the definition covers products “of iron or non-alloy steel, or other alloy steel but excluding stainless steel”, and the fourth indent excludes “flat-rolled products of alloy steel, not further worked than cold-rolled (cold-reduced), of high-speed steel”, that is, high-speed alloy steels whether or not they are stainless. A reader of the Romanian text may conclude that cold-rolled sheet of non-stainless high-speed steel falls under the duty; a reader of the English text, that it is excluded. The word the Romanian version should use is “aliate” (alloy), in place of “inoxidabile” (stainless).

Editorial analysis

The regulation responds to a situation that the figures in the recitals set out clearly: imports from the five countries rose to 23% of the Union’s free market, with prices falling by 34% over the period examined. In the table in recital 1057, the duty on each line is the lower of the dumping margin and the injury margin. For Japan and Taiwan, this nearly halves the duty: Japan had a dumping margin of 54.7% and pays 27.9%, while the remaining imports from Taiwan had 59.6% and pay 27.0%. For India, Türkiye and Vietnam, the duty equals the dumping margin, because that margin is lower than the injury margin.

Combining table 28 with recital 1040 yields a ratio that the regulation does not spell out: the Union industry’s spare capacity, about 12.3 million tonnes (28% of 43.8 million), is roughly 7.3 times all imports from the five countries during the investigation period. The security-of-supply argument is therefore solid at Union level. For Romania, however, recital 1020 shows that no domestic producer belongs to the protected industry, and the only Romanian company in the file is an importer. The price gain goes to plants in 13 other Member States, while the cost stays with Romanian processors, who sent no reply to the questionnaire.

The second observation concerns registration. Imports were made subject to registration by the regulation published on 4 December 2025, precisely so that they could be taxed retroactively; the Commission then decided on 17 April 2026 not to impose provisional duties, and in recital 1069 it concluded that without provisional duties it cannot collect anything retroactively. Between the publication of the registration regulation and 17 November 2026, 348 days passed, and registration had no financial effect. The invoice condition, for its part, carries financial weight only for Taiwan and Türkiye: for India, Japan and Vietnam the individual rate equals the residual rate, so an invoice without the declaration does not change the amount due.

What should be changed

  • A corrigendum to the Romanian version of Article 1(1) and recital 122. Replacing “inoxidabile” (stainless) with “aliate” (alloy) in the fourth indent would align the Romanian text with the English one and would settle, at Romanian customs, the classification of high-speed steel sheet.
  • An express provision ending the registration introduced by Regulation (EU) 2025/2432. Articles 1-3 do not mention it. One sentence in Article 1 would tell customs authorities and importers that the registration requirement has ended and that registered batches can no longer be taxed.
  • Guidance from the Romanian Customs Authority for importers, with the TARIC codes and the model invoice declaration. Small importers who did not follow the investigation would learn before their first batch which document to ask their supplier for, and fewer declarations would be filled in incorrectly.
  • Participation of Romanian processors’ associations in future reviews. The Union interest assessment started from the absence of any reply from users. Hard data on the share of sheet in the cost of a household appliance or a car part would be the only way for the cost to Romanian industry to enter the calculation.

Original text of the legal act

The text below is reproduced in Romanian, the official form of publication.

The full text, as published in the Official Gazette of Romania

Official Journal of the European Union, L series, 2026/2547 of 16 November 2026, ELI: http://data.europa.eu/eli/reg_impl/2026/2547/oj 163 pages PDF, 3.2 MB

Open the official PDFDownload the PDF

The viewer is not shown on small screens. Use the buttons above to open or download the file.

This article is for informational purposes only and does not constitute legal advice. For specific situations, consult a licensed attorney or tax advisor.