In brief

  • Anyone refitting the interior of a building near an airport no longer has to ask for a new approval from the Romanian Civil Aeronautical Authority, as long as nothing on the outside is touched.
  • The exception is strictly limited: any change of location, of height, of volume, of built area or of the facades brings the approval obligation back, and the request is charged as a new approval.
  • A comparison with the 2020 version also reveals a change the order does not announce: the change of owner has disappeared from the list of modifications that required a new approval.
Act: Order MTI no. 778/2026
Published: Official Gazette of Romania (Monitorul Oficial) no. 682 of 18 August 2026
In force from: 18 August 2026

An interior repartitioning no longer goes through the aeronautical authority. Through Order no. 778/2026, the Ministry of Transport and Infrastructure has amended point 4.4 of the Romanian civil aeronautical regulation on approvals for the technical documentation of objectives located in areas with civil aeronautical easements, known by the acronym RACR-AVZ. It is the second intervention of the summer in the field of construction under a special regime, after the handover report form for public investments.

The underlying rule stays the same. Around airports and along flight corridors there are areas where any construction can become an obstacle to air navigation. For buildings in these areas, the Romanian Civil Aeronautical Authority, AACR for short, issues an approval on the technical documentation, and the beneficiary is left with obligations that do not end when the works are completed.

The order has two articles, only one of them substantive, and it changes neither the areas with easements nor the approval procedure. It changes only what happens after the approval has been issued, when the owner wants to modify the building.

What it changes in practice

The first effect is the exception itself. The new text, letter c1) of point 4.4, states that no new AACR approval is required for interior repartitioning works or other exclusively interior modifications of a construction approved earlier. In practice, moving a partition wall, redoing an office space or turning a flat into a medical practice no longer triggers a file at the aeronautical authority.

The second effect is the list of conditions that limit the exception, and it is a long list. The works must not modify the location of the objective, the height regimes, the volume, the built area, the facades, the exterior elements of the construction or any other data in the technical documentation on which the aeronautical assessment was based. If any of these changes, the general rule applies again.

The third effect concerns costs. Letter c), rewritten in the same order, keeps the rule that a modification notified in writing obliges the holder to request a new approval, that the request comes accompanied by updated technical documentation and that it is charged as a new approval. The exception for interior works therefore saves not only time, but also the fee for an approval.

The fourth effect is one of clarity. Until now, the general wording about modifications to fittings could also be read as covering interior refits, which left the owner to choose between asking for an approval that might not be needed and risking a breach of the conditions set in the approval. The new text settles the question in favour of the owner, but only for interventions that stop at the inner face of the exterior walls.

The same authority has meanwhile been given a new task, 964 days earlier than it was meant to arrive: endorsing former military controllers as instructors on civil simulators.

What has changed compared with the previous situation

The regulation was approved by Order no. 893/2020 of the minister of transport, infrastructure and communications, published in Official Gazette of Romania no. 345 of 29 April 2020, and it has been amended several times since.

The comparison with the initial version, the one published in 2020, reveals a second change, which the order does not announce as such. In 2020, letter c) listed the modifications that required a new approval as follows: „of owner, of location, construction solutions, technical characteristics, functional parameters, fittings, etc.”. In the current version, the list starts directly with the location: the change of owner has dropped out of it.

The practical consequence is that the sale of a building located in an area with civil aeronautical easements no longer appears, in this text, among the situations that oblige the new owner to request a new approval. The other obligations under point 4.4 remain, among them the duty to inform future owners or tenants about the limitations set in the approval and about the discomfort generated by civil aviation activities in the area.

One clarification is needed: the 2020 version is the initial one, not necessarily the version immediately preceding this order, because the regulation has been amended in the meantime. What can be said with certainty is what the text contained when it was published and what it contains today.

What has not changed: the obligations under letters a), b), d) and e) of the same point, namely full compliance with the documentation submitted, compliance with the conditions imposed through the approval, informing future owners and obtaining the prior agreement of the administrators of civil aeronautical land, when the objective lies within their perimeter.

Advantages and disadvantages

What it improves

  • Interior repartitioning works escape an approval that had nothing to assess: if nothing on the outside changes, the outline of the building stays the same for air navigation.
  • A cost disappears, because the new approval was charged as a full approval, however small the modification.
  • The list of conditions is worded concretely, with measurable elements rather than general formulas, so the designer can check without help whether the works fall within the exception.
  • The text reduces the number of files without real stakes at the AACR, which should shorten the deadlines for those that genuinely matter.

What remains a problem

  • The order does not say who establishes that a set of works is exclusively interior, so the owner takes the classification upon himself, and the check comes only at an inspection.
  • The disappearance of the change of owner from the list under letter c) is explained nowhere in the order, nor in its preamble.
  • There is no transitional provision for approval requests submitted before 18 August 2026 for exclusively interior works.
  • The exception concerns only the AACR approval; the building permit and the other approvals remain due under the usual rules.
  • The wording „other data in the technical documentation” keeps a grey area: there are data that are not visible on the facade but that counted in the assessment, such as the intended use of the space.

Practical advice

  1. Before starting an interior refit in a building near an airport, take out the initial AACR approval and check which data in the technical documentation it was based on. The exception works only if none of them changes.
  2. Keep the simple test in mind: if the works can be seen from outside the building, you are not within the exception. The facade, the volume and the height are explicit criteria.
  3. Keep in the file a note from the designer confirming that the intervention is exclusively interior. The order does not require it, but at an inspection it is the only proof of the classification.
  4. If you change the intended use of the space, treat the case separately: the intended use may be one of the data in the technical documentation taken into account in the assessment.
  5. If you have already submitted an approval request for exclusively interior works, ask the AACR what happens to it, because the order provides nothing for pending files.
  6. When buying a building in an area with civil aeronautical easements, ask the seller for the AACR approval and the list of limitations. The obligation to inform the future owner has remained in the regulation.

Frequently asked questions

Which works now escape the AACR approval?
Interior repartitioning works and other exclusively interior modifications of a construction approved earlier, provided they do not change the location, the height regime, the volume, the built area, the facades, the exterior elements or other data in the technical documentation on which the approval was based.
When does it apply from?
From 18 August 2026, the date the order was published in the Official Gazette of Romania. Ministerial orders enter into force on publication, unless they themselves provide for a later date.
If I replace the exterior joinery, am I within the exception?
No. Joinery belongs to the facade and to the exterior elements of the construction, both expressly listed among the situations that fall outside the exception.
How much does a new approval cost, when one is needed?
The regulation does not set the amount in this text, but it states that an approval request for a modification is charged as a new approval, meaning at the full fee, not a reduced one.
Do I still have to notify the AACR if I sell the building?
The change of owner has dropped out of the list under letter c), where it appeared in the initial 2020 version. What has remained, however, is the obligation to inform future owners or tenants about the limitations set in the approval and about the duty to observe them.
Does the exception mean I no longer need any paperwork?
No. The order concerns only the approval of the aeronautical authority. The building permit and the other approvals are required under the general rules of construction legislation.

Original text of the legal act

The text below is reproduced in Romanian, the official form of publication.

The full text, as published in the Official Gazette of Romania

Official Gazette of Romania no. 682 of 18 August 2026 16 pages PDF, 170 KB the act starts on page 15

Open the official PDFDownload the PDF

The viewer is not shown on small screens. Use the buttons above to open or download the file.

This article is for informational purposes only and does not constitute legal advice. For specific situations, consult a licensed attorney or tax advisor.